How Often Should Furniture of Different Materials Undergo Deep Cleaning?
Aug 13, 2026
Leave a message
Deep cleaning schedules for outdoor furniture vary significantly based on material-specifically, factors such as weather resistance, the rate of dirt accumulation, and the risk of aging. Proper scheduling avoids the wasted effort of over-cleaning while preventing the buildup of grime that accelerates damage.
Metal (Aluminum Alloy / Cast Aluminum / Wrought Iron)
Deep cleaning frequency: Once every six months
For routine maintenance, simply wipe away surface dust weekly. Every six months, thoroughly scrub the frame and crevices with a neutral detergent; rinse and dry immediately, then apply a thin layer of car wax to protect the finish. In coastal areas exposed to salt spray, increase the frequency to once every three months to minimize corrosion risks.
Wicker/Rattan (PE Synthetic Rattan / Natural Rattan)
Deep cleaning frequency: Once every two months (once a month during the rainy season)
Use a soft-bristled brush to sweep dust and debris from the weave. Thoroughly wipe down with a mild soapy solution, rinse, and air-dry completely to prevent water from pooling in the crevices and causing mold growth; this material requires relatively frequent cleaning compared to others.
Solid Wood / Treated Wood
Deep cleaning frequency: Once every three months (once every six months for high-end teak)
Clean and dry the surface thoroughly, following the wood grain. Simultaneously, apply a coat of hard-wax oil to seal the wood pores and prevent moisture infiltration, which can cause warping or mold. For high-end, oil-rich woods like teak, a sanding and protective oil application once every six months is sufficient.
Send Inquiry
